Chimney fan for open fireplaces
From €1,149
PROFESSIONAL CHIMNEY FAN FOR YOUR FIREPLACE
BlueChimney, model 310-200-80, is suitable for large, open fireplaces connected to brick chimneys with a illumination area of up to 7,000 cm2 (e.g. 100×70 cm). Rain cap function is not included.
The fan in BlueChimney is powered by a 24V low-voltage engine from one of the world’s leading manufacturers and is connected using an electrical outlet in the attic, outdoors or indoors. Consequently the installation does not require an electrician.
BLUECHIMNEY IS YOUR INVESTMENT IN A SMOKE-FREE HOME!
LESS TIME NEEDED FOR STARTING THE FIRE, MORE TIME SPENT WITH THE FAMILY
HEALTHIER
INDOOR CLIMATE
REMOVES SMOKE AND ODOUR ANNOYANCES
HEAT UP YOUR WOOD-BURNING STOVE IN RECORD TIME
BETTER HEATING ECONOMY
ADDITIONAL INFORMATION
The motor is cooled by outside air. It has been tested up to a temperature of 700 degrees Celsius (more than twice as hot as smoke from a typical fire gets). BlueChimney has an integrated rain hood to keep water from getting into the chimney. This is particularly important for steel chimneys.
BlueChimney provides a full chimney aperture as required by stove manufacturers based on recommendations from Denmark’s construction research institute.
Installing a BlueChimney is something you can easily do yourself, but your local fireplace centre or your chimney sweep are also well able to install the smoke extractor for you.
WOULD YOU LIKE MORE INFORMATION ABOUT THE SMOKE EXHAUSTER?
Dimensions
Width: ø310 mm, height: 280 mm
Weight
9.5 kg, including round flange
Power consumption
From 2 to 20 Watt
Material
Stainless steel type AISI304
Performance
Draws up to 600 m3 per hour
Motor
24 Volt EC low voltage motor from the German company, ebmpapst.
Power supply
Short-circuit-proof — does not require grounding
Mounting
BlueChimney has a drawing capacity of up to 600 m3 per hour and is suitable for large, open fireplaces with a clearance area of max 7,000 cm2 (e.g., 100×70 cm) connected to brick chimneys .
Product warranty
2-year product warranty
Technical specifications
Draws up to 600 m3 per hour. Able to withstand flue gas temperatures of up to 500 °C.
